Simulation is more than Software

Directcontact
0
Wishlist
0 0
Cart
EN
Technology Day Turbomachinery: 3D inverse Design & 3D CFD

Design and simulate pumps, fans, compressors and turbines with TURBOdesign Suite and Ansys CFD

Tuesday, March 30, 2021 | 9am – 3:30pm

  • ADT TURBOdesign Suite & Practical Usage
  • Simulation of Turbomachines with Ansys CFD
  • Process Integration in Ansys Workbench

Turbomachinery Development today

Get to know sophisticated numerical simulation and computational design

The event is supported by:

online - Program and Presentations

CADFEM and ISimQ invite you to a joint, free and virtual info and training day. We are pleased to announce guest speakers Prof. Dr. Mehrdad Zangeneh, ADT / University College London and Prof. Dr. Jörg Seume, Leibnitz University Hannover / Institute for Turbomachinery and Fluid Dynamics.

Specifications in Turbomachinery Design are manifold: Both the behaviour in the part- and overload range, resulting in energy comsumption over the complete operating range, as well as requirements in manufacturing procedures, cavitation avoidance, suction head, leakage losses, transport of solids and particles or geometry limitations can be design relevant.

The nowadays available most sophisticated design and simulation methods help to improve speed and sustainability in the design process and are thus essential for successful enterprises in order to fulfil mandatory legal requirements or strengthen market positions. A two-stage approach is presented, consisting of the software tools TURBOdesign Suite and Ansys CFD. Both complement one another in an optimal way.The method „3D Inverse Design“ generates blade and meanline design automatically, based on the machine duty data. CFD (Computational Fluid Dynamics) allows to represent complete performance maps as well as the most complex physical phenomena.

The event language is German.

Agenda

Tuesday, March 30, 2021 | 9am – 3:30pm

TimeTopicPresenter
9:00 – 9:15Welcome and Introduction 
9:15 – 9:45Keynote: Optimization of a Mixed-flow Transonic Compressor for an Active High-Lift System Using TURBOdesign1Prof. Dr. Jörg Seume,
Uni Hannover, TFD
9:45 – 10:303D-Inverse-Design for Turbomachinery (in English)Prof. Dr. Mehrdad Zangeneh, Advanced Design Technology
10:3011:00Coffee Break 
11:00 – 11:30Application Example: TURBOdesign Suite & Practical UsageDr. Barbara Neuhierl, CADFEM
11:30 – 12:30Numerical Simulation Today: CFD for TurbomachineryDr. Georg Scheuerer, ISimQ
12:301:30Lunch Break 
1:30 – 2:30Demo: Design a Turbomachine with TURBODesign SuiteDr. Barbara Neuhierl, CADFEM
2:30 – 3:30Demo: Simulate a Turbomachine with mit Ansys CFXDr. Georg Scheuerer, ISimQ

Registration

Please click here and fill in the registration form. The event is free-of charge.

Frequently Asked Questions

Is the event held in English or German?

The event language will be German. Exeptionally, the lecture of Prof. Dr. Mehrdad Zangeneh "3D-Inverse-Design for Turbomachinery" will be held in English.

Where does the info day take place?

The Info day is taking place online. You will receive access data to the virtual meeting room in time.

How can I register?

Please find the registration link below.

Is the Info day free of charge?

Yes, participation is for free.