Design and simulate pumps, fans, compressors and turbines with TURBOdesign Suite and Ansys CFD
Tuesday, March 30, 2021 | 9am – 3:30pm
Turbomachinery Development today
Get to know sophisticated numerical simulation and computational design
The event is supported by:
online - Program and Presentations
CADFEM and ISimQ invite you to a joint, free and virtual info and training day. We are pleased to announce guest speakers Prof. Dr. Mehrdad Zangeneh, ADT / University College London and Prof. Dr. Jörg Seume, Leibnitz University Hannover / Institute for Turbomachinery and Fluid Dynamics.
Specifications in Turbomachinery Design are manifold: Both the behaviour in the part- and overload range, resulting in energy comsumption over the complete operating range, as well as requirements in manufacturing procedures, cavitation avoidance, suction head, leakage losses, transport of solids and particles or geometry limitations can be design relevant.
The nowadays available most sophisticated design and simulation methods help to improve speed and sustainability in the design process and are thus essential for successful enterprises in order to fulfil mandatory legal requirements or strengthen market positions. A two-stage approach is presented, consisting of the software tools TURBOdesign Suite and Ansys CFD. Both complement one another in an optimal way.The method „3D Inverse Design“ generates blade and meanline design automatically, based on the machine duty data. CFD (Computational Fluid Dynamics) allows to represent complete performance maps as well as the most complex physical phenomena.
The event language is German.
Agenda
Tuesday, March 30, 2021 | 9am – 3:30pm
Time | Topic | Presenter |
9:00 – 9:15 | Welcome and Introduction | |
9:15 – 9:45 | Keynote: Optimization of a Mixed-flow Transonic Compressor for an Active High-Lift System Using TURBOdesign1 | Prof. Dr. Jörg Seume, Uni Hannover, TFD |
9:45 – 10:30 | 3D-Inverse-Design for Turbomachinery (in English) | Prof. Dr. Mehrdad Zangeneh, Advanced Design Technology |
10:30 – 11:00 | Coffee Break | |
11:00 – 11:30 | Application Example: TURBOdesign Suite & Practical Usage | Dr. Barbara Neuhierl, CADFEM |
11:30 – 12:30 | Numerical Simulation Today: CFD for Turbomachinery | Dr. Georg Scheuerer, ISimQ |
12:30 – 1:30 | Lunch Break | |
1:30 – 2:30 | Demo: Design a Turbomachine with TURBODesign Suite | Dr. Barbara Neuhierl, CADFEM |
2:30 – 3:30 | Demo: Simulate a Turbomachine with mit Ansys CFX | Dr. Georg Scheuerer, ISimQ |
The event language will be German. Exeptionally, the lecture of Prof. Dr. Mehrdad Zangeneh "3D-Inverse-Design for Turbomachinery" will be held in English.
The Info day is taking place online. You will receive access data to the virtual meeting room in time.