Simulation is more than Software

Directcontact
0
Wishlist
0
Cart
EN

Do you know eLearning from CADFEM?

Discover the flexible way of further education with a top free module and book all courses until 30 September with 50% summer special discount.

 

Load-driven component design using Ansys Topology Optimization

CADFEM
Training eLearning
Structural mechanics
Structural mechanics
Concept design phase simulations, Scalability of simulations

Automatic generation and validation of an optimal material distribution in each design space under structural mechanical conditions

The development of high-strength materials and the constant demand for cost and weight reduction require new solutions and strategies in the design process of innovative components. The key to an optimal structure is the identification of the relevant load paths. Topology ...

more details of product

Overview
Level:
Advanced
Target group:
Users, Students, Instructors
Prerequisites:
Basic knowledge of Ansys Mechanical
Benefits Short Description:
  • Learn suitable ways of setting up optimization tasks
  • Understand how to correctly interpret the results of topology optimization
  • Learn strategies for CAD reconstruction
  • Validate and compare the reconstructed model
Applications:
Linear/Non-linear Simulation, Optimization
Software used:
Ansys Mechanical, Ansys SpaceClaim Direct Modeler
Level
Advanced
Target group
Users, Students, Instructors
Prerequisites
Basic knowledge of Ansys Mechanical
Benefits Short Description
  • Learn suitable ways of setting up optimization tasks
  • Understand how to correctly interpret the results of topology optimization
  • Learn strategies for CAD reconstruction
  • Validate and compare the reconstructed model
Applications
Linear/Non-linear Simulation, Optimization
Software used
Ansys Mechanical, Ansys SpaceClaim Direct Modeler
agenda day 1
  • Load-sensitive optimized Component Design
  • Appropriate Formulation of the Optimization Task
  • Understanding Goals and Restrictions
  • Optimization considering Manufacturing Process
agenda day 2
  • Load Cases and Validation
  • Reverse Engineering: The Way back into CAD geometry
  • Stress Reduction
  • Overview: Linear Dynamics, Lattice Structures and Assemblies

eLearning offer (reduced by 50% until sep. 30th)

Available dates

No suitable date? There is no suitable date for you, or you would like individual training for your team - then we will gladly advise you.

Our offer in detail

This training is offered as a 2 day(s) on-site training
or alternatively as an eLearning training with a total of 2 working day(s) with flexible time management.

Day 1

01 Load-sensitive optimized Component Design

  • Fields of application for topology optimization
  • Introduction of optimization methods
  • Workflow in Ansys Workbench
  • Workshop: 2D-Michell structure

02 Appropriate Formulation of the Optimization Task

  • Solid Isotropic Material with Penalty (SIMP method)
  • Design space and exclusions
  • Objective functions
  • Response constraints
  • Workshop: Cantilever

03 Understanding Goals and Restrictions

  • Workshop: Design space & exclusions
  • Workshop: Objective functions and constraints
  • Restarting an optimization
  • Convergence criteria and their relevance

04 Optimization considering Manufacturing Process

  • Analysis settings and penalty parameter
  • Meshing recommendations
  • Manufacturing constraints
  • Workshop: Seat group holder

Day 2

05 Load Cases and Validation

  • Multiple load cases
  • Workshop: Engine mount load cases
  • Geometry transfer into CAD
  • Workshop: Engine mount validation

06 Reverse Engineering: The Way back into CAD geometry

  • General workflow
  • Helpful tools in SpaceClaim
  • 2D Reverse Engineering
  • Demonstration & workshop
  • 3D Reverse Engineering
  • Demonstration & workshop: Seat group holder

07 Stress Reduction

  • Workshop: Rocker arm of an internal combustion engine
  • Reference simulations and validation
  • Compliance and mass restriction
  • Mass objective and global stress restriction
  • Results and discussion
  • Local stress restrictions

08 Overview: Linear Dynamics, Lattice Structures and Assemblies

  • Level set: introduction & demonstration
  • Linear dynamics: Rocker Arm
  • Linear dynamic and static optimization
  • Lattice structures
  • Submodeling
  • Assemblies

The development of high-strength materials and the constant demand for cost and weight reduction require new solutions and strategies in the design process of innovative components. The key to an optimal structure is the identification of the relevant load paths. Topology optimization is a numerical tool that calculates an optimal material distribution with respect to a predefined design space. Mechanical loads as well as design or manufacturing constraints are considered. In this training course you will learn how to handle your tasks in Ansys Workbench, which enables a structured and intuitive working process for the creation of topology-optimized structures.

Equally important is the updating of the CAD model based on the optimized design: Using Ansys SpaceClaim Direct Modeler, you will practice automatically feeding back the result of the topology optimization into CAD data and preparing it for subsequent steps.

This course is aimed at designers and development engineers. Topology optimization is included in the license scope for all Ansys Discovery and Ansys Mechanical products. In addition, Ansys SpaceClaim Direct Modeler is used with a focus on the facet tab. Basic knowledge of SpaceClaim is not required.

By the end of this training you will know how to formulate the optimization task in a suitable way for structural-mechanical designs, how to prepare the result of the topology optimization on the STL level and how to generate a usable CAD geometry afterwards. Many examples convey these tasks not only theoretically, but also enable a quick transfer of the topics to your own practical tasks.

Dr. sc. ETH Manfred Maurer
Engineering Services, CADFEM (Suisse) AG, Aadorf
Florian Hollaus
CAE Engineer, CADFEM (Austria) GmbH, Innsbruck
Keno Kruse
Business Development, CADFEM GmbH, Hanover
Christian Abramowski
Technical Manager Hannover, CADFEM GmbH, Hanover
Dr.-Ing. Markus Kellermeyer
Productmanager Learning on Demand, CADFEM GmbH, Grafing
Simon Petermaier
Technik, CADFEM GmbH, Grafing

Do you have questions on the training?

Personal advice

Germany

Head of Professional Development
Dr.-Ing. Marold Moosrainer

Austria

Head of Engineering Services Austria

Switzerland / Liechtenstein

Head of Seminars
Dr. sc. Jörg Helfenstein

France

Application Engineer
PhD Ingénierie mécanique Mickaël Gay

United Kingdom

Business Development Manager

Ireland

Business Development Manager

Frequently asked questions - eLearning

Can I test the eLearning offer without obligation?

To get a clear impression of our online learning format, we offer you a trial allowing you access to the starting module of an eLearning seminar of your choice. No costs, no cancellation period or anything similar. Moreover, with this free test access you can check all the technical requirements for a smooth learning process. You can easily request the free module from any eLearning course.

How much time should I allow for an eLearning course?

Each online seminar day comprises four eLearning modules. You should ideally allow 90 to 120 minutes of uninterrupted learning time for each module. This will allow you to acquire the knowledge provided by a module and to consolidate it through quiz questions and Ansys exercises. By dividing each module into micro learning units, you can also make good use of smaller time windows, such as on your commute.

For how long can I access the learning content?

A prerequisite for using the learning contents of booked eLearning seminars is the possession of an access to the CADFEM learning platform. This access is valid for 12 months and can be extended annually. This allows you to decide how long you want to have access to your numerous videos, PDF documents and quiz questions.


Frequently asked questions - Training

When will I receive the final confirmation for my training booking?

Straight after you sign up, an automatic confirmation of receipt will be sent to the email addresses you provided. Once you have successfully verified the data you provided, you will receive your personalized sign-up confirmation, containing further information on seminar fees, the billing address, hotel recommendations, etc., by email within two to three working days.  

As soon as the minimum number of attendees has been reached, you will receive a final training confirmation containing further information on how to get to the venue. We recommend that you wait until you have received this final confirmation before booking your travel and accommodation.

If the minimum number of attendees is not reached, we reserve the right to cancel the training seven days before it is due to start at the latest. We are happy to help you change your booking to an alternative date. Please note that we accept no liability for hotel or travel bookings that attendees have already made.

When is the sign-up deadline for a training?

Training places will generally be allocated based on the order in which attendees sign up. For this reason, we always recommend booking for your desired date as early as possible.

As long as a seminar still has free places, it can be booked.

When do the training courses begin and end?

Usually the training courses start at 9:00 am and end at 5:00 pm of the respective local time. The actual course times will be stated in the booking confirmation. Please note that, depending on the training host, there may be a possible time shift between your and the provider's local time. Therefore all local times are provided with the valid time shift to Greenwich Mean Time (GMT). 

The following time difference to GMT during summer/winter time applies to the individual training providers:

Additional Offers

The right training, hardware and additional software products are the keys to success when it comes to a quick introduction to simulation.