Simulation is more than Software

Free Trial Version
0
Wishlist
0 0
Cart

Directcontact
EN
Ansys Multiphysics in Stent Development
ADMEDES is one of the most renowned specialists in the field of wire processing. CADFEM simulated the application conditions for a novel stent made of Nitinol.

Simulation that goes to the heart

Sector: Medical technologySpecialist field: Multiphysics, Structural mechanics

For the new development of a stent made of nitinol, the company ADMEDES Schuessler used the knowledge gained from a simulation model generated by CADFEM on the basis of Ansys Multiphysics to better understand the interactions between fluid and structure at the aortic valve during pulsation.

Summary

Task

To accurately predict the interaction between the stent and the heart valve during a pulse, a simulation model had to be developed that accurately reflects the transient processes between fluid (blood) and structure (stent network). In addition, it should be possible to make statements about the effects of continuous operation on the lifetime of the stent.
 

Solution

A realistic simulation process was set up using the ANSYS Multiphysics platform. An initial structural analysis provided stress and deformation data of the stent in the expanded state. This stressed structure was then linked to the leaflet valves of the heart. Using a transient fluid-structure interaction analysis, the stent and the aorta have been included, as well as the compressive forces of the blood acting on the leaflet valves.

Customer benefits

ADMEDES Schuessler was provided with a detailed simulation process to predict the durability and lifetime of the stent in a wide range of environmental conditions.

Project Details

Task

The company ADMEDES Schüssler is a leading global supplier of finished, self-expanding nitinol implants. In order to accurately predict the interaction between the stent and the heart valve during a pulse, a simulation model had to be developed that accurately reflects the transient processes between fluid (blood) and structure (stent network). In addition, it should be possible to make statements about the effects of continuous operation on the lifetime of the stent.


Customer Benefit

This pilot project provided:

  • unprecedented insights into the development of forces and stresses during a systolic pulse,
  • a demonstration of the stability and robustness of the stent under the simulated conditions,
  • in-depth information not accessible with experimental measurements,
  • a tailored modeling procedure for the prediction of stent stability and lifetime under different working conditions.

Solution

A realistic simulation process was set up using the ANSYS Multiphysics platform. Starting with an expanded stent (Fig. Position a), an initial structural analysis provided the stress and deformation state after crimping and positioning against the aortic wall (Fig. Position b). The prestressed structure was then connected to the leaflet valves of the heart (Fig. position c). During a transient fluid-structure interaction analysis, the stent and aortic wall were then considered and the compressive forces were transferred from the blood to the leaflet valves (Fig. position d). The evolution of stresses in the stent material nitinol were determined over a complete systolic pulse beat (Fig. Stent model with diagram). The anisotropic material properties of the pericardium were considered as well as a material model for the shape memory alloy Nitinol and a non-Newtonian viscosity model for human blood.

Images: © ADMEDES Schuessler


Head of Engineering

Related products and training offers