Attend all CADFEM courses without travelling - even in your home office. You can perform all software exercises in your web browser with guidance of our trainers. Beneath that, a rising number of trainings is offered as self-paced eLearning courses. Click here to learn more about our digital training.
Non-linear Simulation Using Ansys Mechanical
Understanding large deformations, contact and nonlinear materials
This course provides you an introduction to the world of nonlinearities and enables you to understand convergence behavior.
Today, nonlinear calculations are an integral part of the development process. Special materials, complex manufacturing processes, and optimal resource utilization all make it necessary for nonlinear effects to be taken into account for the purposes of simulation. Do you already ...
Our offer in detail
This training is offered as a 2-day course or alternatively as
a self-paced eLearning course, in which you should invest a total of 2 learning day(s) with your own time allocation.
01 Nonlinear task classes and solution methods
- Classification of non-linear effects
- The Newton method, with examples
- Characteristic convergence behavior relating to different tasks
- Workshop: Tensile test on a standard specimen
02 Ansys Solver Settings
- Basic settings: Load step and time step control, iterations, convergence criteria, Newton-Raphson residuals, element violations
- Advanced settings: Newton-Raphson options, Line-search, predictor
- Special topics: arc length method, stabilization dynamic analysis, semi-implicit, restarting
- Workshop: convergence behavior with strongly differing materials
03 Geometric nonlinearities
- Examples of geometric nonlinearities: Stress-stiffening, Spin-softening, corotating element coordinate systems
- Large displacements and small deformations
- Large deformations: true strains and true stresses
- Deformation-dependent loads
- Workshop: designing a hybrid cord
- Workshop: transformation of a stress-strain curve
04 Stability problems
- Classification of stability problems (buckling, punctures, load capacity)
- Causes of stability problems
- Eigenvalue buckling analysis
- Nonlinear stability analyses: arc length method, stabilization, transient analysis
- Workshop: stability analysis of a strut
05 Nonlinear Materials – Plasticity
- Fundamentals of plasticity theory (flow condition, flow rule, strain hardening)
- Typical hardening models (isotropic and kinematic)
- Material definition in Ansys Mechanical
- Determination of the hardening curve using tensile test data
- Characteristic features of postprocessing
- Workshop: deep-drawing analysis
06 Nonlinear Materials – Hyperelasticity
- Overview of implementations
- Basics of hyperelasticity
- Typical distortion energy functions & how to define these in Ansys
- Parameter fitting in Ansys Workbench, based on the tensile test
- Element formulations
- Workshop: the axial and torsional stiffness of a chassis bushing
07 Contact Modelling
- Contact analysis workflow
- Overview of the main contact settings: behavior, formulation, detection method, contact stiffness.
- Evaluation of contacts
- Comparison of contact formulations: penalty, normal Lagrange, augmented Lagrange
- Workshop: transmittable torsional moment of a transverse press brace
08 Convergence, performance, accuracy
- Typical convergence problems and error messages relating to rigid body movements and element distortions, plus corrective actions
- Increasing performance: choosing the right solver (direct or iterative solver) and also parallelizing the analysis (SMP and DMP)
- What impacts the accuracy of an analysis
- Special techniques: substructures and adaptive remeshing
- Workshop: substructure model of a Hertzian contact
- Workshop: adaptive re-linking in an intendency analysis
Today, nonlinear calculations are an integral part of the development process. Special materials, complex manufacturing processes, and optimal resource utilization all make it necessary for nonlinear effects to be taken into account for the purposes of simulation. Do you already have experience with linear FEM? If so, this course offers you a practice-oriented introduction to solving typical tasks in which large deformations, nonlinear material models or contacts have to be considered. Working with Ansys Mechanical, you will learn important solver settings and receive basic background knowledge, detailed explanations of convergence behavior, and proven practical tips for your daily work.
- Simulation users who have gained some initial experience with Ansys Mechanical and want to work on non-linear tasks
- Experienced users who want to better understand and control convergence behavior
- Project managers and decision-makers who shape expectations of numerical analysis and want to draw the right conclusions from the results
This course will provide you with introductory simulation tasks involving large deformations, stability problems, plasticity, hyperelasticity, and contacts. You will gain a detailed understanding of what happens in the background during the solution process and how you can positively influence the convergence behavior and performance of your analysis. Practice-oriented workshops will give you time to immediately apply your knowledge.
Dr.-Ing. Hendrik Donner
Dr. sc. Jörg Helfenstein
Dr. sc. Juan Escallòn
Dr.-Ing. Markus Kellermeyer
Do you have questions on the training or the eLearning?
Straight after you sign up, an automatic confirmation of receipt will be sent to the email addresses you provided. Once you have successfully verified the data you provided, you will receive your personalized sign-up confirmation, containing further information on seminar fees, the billing address, hotel recommendations, etc., by email within two to three working days.
As soon as the minimum number of attendees has been reached, you will receive a final training confirmation containing further information on how to get to the venue. We recommend that you wait until you have received this final confirmation before booking your travel and accommodation.
If the minimum number of attendees is not reached, we reserve the right to cancel the training seven days before it is due to start at the latest. We are happy to help you change your booking to an alternative date. Please note that we accept no liability for hotel or travel bookings that attendees have already made.
Usually the training courses start at 9:00 am and end at 5:00 pm of the respective local time. The actual course times will be stated in the booking confirmation. Please note that, depending on the training host, there may be a possible time shift between your and the provider's local time. Therefore all local times are provided with the valid time shift to Greenwich Mean Time (GMT).
The following time difference to GMT during summer/winter time applies to the individual training providers:
To get a clear impression of our online learning format, we offer you a trial allowing you access to the starting module of an eLearning seminar of your choice. No costs, no cancellation period or anything similar. Moreover, with this free test access you can check all the technical requirements for a smooth learning process. You can easily request the free module from any eLearning course.
Each online seminar day comprises four eLearning modules. You should ideally allow 90 to 120 minutes of uninterrupted learning time for each module. This will allow you to acquire the knowledge provided by a module and to consolidate it through quiz questions and Ansys exercises. By dividing each module into micro learning units, you can also make good use of smaller time windows, such as on your commute.
A prerequisite for using the learning contents of booked eLearning seminars is the possession of an access to the CADFEM learning platform. This access is valid for 24 months and can be extended. This allows you to decide how long you want to have access to your numerous videos, PDF documents and quiz questions.
Dr. Paul Lethbridge
What CADFEM customers are saying
Prof. Dr.-Ing. Thomas Binder
Program director for Mechanical Engineering, Ingolstadt University of Applied Sciences
The CADFEM eLearning Nonlinear Simulation with Ansys Mechanical offers a user-friendly learning environment. The course focuses on understanding the mechanical problem, supported by continuous practice with Ansys Workbench. I particularly like the fact that the instructor addresses the limitations of the simulation, thus underlining his technical competence.
The right training, hardware and additional software products are the keys to success when it comes to a quick introduction to simulation.