Simulation is more than Software

Free Trial Version
0
Wishlist
0 0
Cart

Directcontact
EN
Training & eLearning for electromagnetic simulation

Learn LF and RF Simulation from the #1 Training Provider

The CADFEM program for electromagnetics offers simulation expertise you can count on.

Depending on your level of experience, you can take part in basic, advanced, or expert courses.

Free modules

Get a first impression of content, methods & speakers. 30 days access. Free of charge and without obligation.
Available for all eLearnings - simply filter by event type.

Book your training or eLearning now!

CADFEM France SAS is recognized as a certified training organization in France by the Direction Régionale des Entreprises, de la Concurrence, de la Consommation, du Travail et de l'Emploi (DIRECCTE), under the number 84691692869. You can therefore ask your OPCO for financing your training. The quality certification was issued for the following categories of actions: ACTIONS DE FORMATION.

Items 1-12 of 14
ElectromagneticsElectromagnetics
An Insight into Electric Motors

Acquire in-depth knowledge of the structure and mode of operation, of typical types of electric motor and their areas of application.

Specialist field
Electromagnetics
Applications
Low frequency
Software used Software-independent
Training
2 days
Software-independent
Training
2 days
Level
Basic

Next date

Live Online (Austria)
Wed-Thu, 13.11.2024 - 14.11.2024
€1,600.00
excl. Tax
New
New
ElectromagneticsElectromagnetics
Analyzing and improving EMC with simulation & measurement

In this training, you will learn how to effectively use simulation and testing in combination to get your electric device certified.

Specialist field
Electromagnetics
Applications
High frequency
Software used Ansys SIwave, Ansys EMC Plus
Training
3 days
Ansys SIwave, Ansys EMC Plus
Training
3 days
Level
Basic

Next date

Grafing (Germany)
Tue-Thu, 26.11.2024 - 28.11.2024
€2,400.00
excl. Tax
ElectromagneticsElectromagnetics
Ansys Q3D: Simulation of Parasitic Effects in Power Electronics

Learn how to use Ansys-Q3D-Extractor-based 3D circuit design to localize and optimize interference effects

Specialist field
Electromagnetics
Applications
Low frequency
Software used Ansys Q3D
Training
eLearning
2 days
Ansys Q3D
Training
eLearning
2 days
Level
Basic

Next date

Live Online (Germany)
Tue-Wed, 16.07.2024 - 17.07.2024
Only a few places left
€1,600.00
excl. Tax
ElectromagneticsElectromagnetics
Design of Electric Machines with Motor-CAD

Learn how to design motors and generators quickly and reliably using simple simulation methods.

Specialist field
Electromagnetics, Concept design phase simulations
Applications
Low frequency
Software used Motor-CAD
Training
eLearning
3 days
Motor-CAD
Training
eLearning
3 days
Level
Basic

Next date

Leinfelden-Echterdingen (Germany)
Tue-Thu, 25.06.2024 - 27.06.2024
Appointment confirmed
€2,400.00
excl. Tax
ElectromagneticsElectromagnetics
Dimensioning Inductive Heat Treatment Processes by Simulation

A physical round-up: Electromagnetics, Temperature-Fields and Mechanics at induction heat treatment

Specialist field
Electromagnetics, Multiphysics, Heat Transfer
Software used Ansys Maxwell, Ansys Mechanical
Training
2 days
Ansys Maxwell, Ansys Mechanical
Training
2 days
Level
Expert

Next date

Live Online (Germany)
Tue-Wed, 10.09.2024 - 11.09.2024
€1,600.00
excl. Tax
ElectromagneticsElectromagnetics
Evaluate Signal and Power Integrity of PCB Designs with SIwave

In this training you will learn how to use simulation to accelerate and optimize the development process of PCBs.

Specialist field
Electromagnetics
Applications
High frequency
Software used Ansys SIwave
Training
2 days
Ansys SIwave
Training
2 days
Level
Basic

Next date

Live Online (Germany)
Wed-Thu, 18.09.2024 - 19.09.2024
€1,600.00
excl. Tax
ElectromagneticsElectromagnetics
Failure Analysis of Electric Motors and Innovative Solutions

Learn how you can improve the service life and efficiency of electric machines during design and development

Specialist field
Electromagnetics
Applications
Low frequency
Software used Software-independent
Training
1 day
Software-independent
Training
1 day
Level
Advanced

Next date

Live Online (Austria)
Fri, 15.11.2024
€800.00
excl. Tax
ElectromagneticsElectromagnetics
RF Simulation with Ansys HFSS

In this course you will learn how to perform radio frequency 3D-Electomagnetic simulation with Ansys HFSS.

Specialist field
Electromagnetics
Applications
High frequency
Software used Ansys HFSS
Training
eLearning
2 days
Ansys HFSS
Training
eLearning
2 days
Level
Basic

Next date

Live Online (United Kingdom)
Thu-Fri, 10.10.2024 - 11.10.2024
€1,600.00
excl. Tax
Updated
Updated
ElectromagneticsElectromagnetics
Simulation of Electric Machines with Ansys Maxwell

Learn how to perform field simulation with Ansys Maxwell for precise assessment of the typical parameters of electric machines.

Specialist field
Electromagnetics
Applications
Low frequency
Software used Ansys Maxwell
Training
2 days
Ansys Maxwell
Training
2 days
Level
Advanced

Next date

Live Online (Germany)
Tue-Wed, 17.09.2024 - 18.09.2024
€1,600.00
excl. Tax
Updated
Updated
ElectromagneticsElectromagnetics
Simulation of Electromagnetic Fields with Ansys Maxwell

From magnetostatics to magnetodynamics: Learn, how to easily model and simulate magnets, coils, etc.

Specialist field
Electromagnetics
Applications
Low frequency
Software used Ansys Maxwell
Training
eLearning
3 days
Ansys Maxwell
Training
eLearning
3 days
Level
Basic

Next date

Live Online (Austria)
Tue-Thu, 10.09.2024 - 12.09.2024
€2,400.00
excl. Tax
ElectromagneticsElectromagnetics
Simulation of Induction Machines with Ansys Motor-CAD

In this training, you will learn how to use several approaches for the simulation of induction machines.

Specialist field
Electromagnetics
Applications
Low frequency
Software used Motor-CAD
Training
1 day
Motor-CAD
Training
1 day
Level
Advanced

Next date

Live Online (Germany)
Wed, 28.08.2024
€800.00
excl. Tax
OpticsOptics
Simulation of Optical Systems with Ansys Speos

From optical sensors to lighting solutions. In this training, you will learn to use the precision of Speos for your simulations.

Specialist field
Optics
Software used Ansys Speos
Training
eLearning
2 days
Ansys Speos
Training
eLearning
2 days
Level
Basic

Next date

Lyon (France)
Wed-Thu, 28.08.2024 - 29.08.2024
€1,600.00
excl. Tax
Items 1-12 of 14

Training for Electromagnetic Simulation

Are you involved in the development of electric motors, generators, transformers as well as sensors, antennas, or other electronic products? We can provide you with the right training for your electromagnetic simulations. Within the wide range of advanced trainings offered by CADFEM, you will find basic courses for introduction to RF simulation with Ansys HFSS or simulation of electromagnetic fields with Ansys Maxwell, everything about electric motors, PCB designs with SIwave or thermal management. From Python scripting in Ansys Maxwell to the design of inductive heat treatment processes by simulation, experienced engineers benefit from the many years of know-how of our instructors in both the advanced and expert courses.