Training and eLearning courses
Do you already know CADFEM training & elearning? Book here:
Take advantage of the CADFEM Learning Subscription: order 1x, get 365 days of simulation knowledge at your disposal.
Get a first impression of the content, methods and speakers: free access to the first module for 30 days!
CADFEM France SAS is recognized as a certified training organization in France by the Direction Régionale des Entreprises, de la Concurrence, de la Consommation, du Travail et de l'Emploi (DIRECCTE), under the number 84691692869. You can therefore ask your OPCO for financing your training. The quality certification was issued for the following categories of actions: ACTIONS DE FORMATION.
Scalability of simulationsPython Primer for Ansys
In this training, you will learn the basics of Python programming for using PyAnsys and automating your Ansys simulations.
Training
eLearning
Level
Structural mechanicsQuick Insights on Fatigue Life Assessment with FEM
From set square and calculation assessment to Excel for fatigue and life cycle calculation using FEM: this training provides a clear and understandable introduction into fatigue life assessment.
Training
Level
System simulationReduced Order Models for System Simulation with Ansys
Learn how to combine the accuracy of field simulation with the speed of system simulation for highly complex systems.
Training
Level
ElectromagneticsRF Simulation with Ansys HFSS
In this course you will learn how to perform radio frequency 3D-Electomagnetic simulation with Ansys HFSS.
Training
eLearning
Level
Structural mechanicsRotor Dynamics — Dynamic Simulation of Rotating Structures
In this training you learn to understand and to simulate rotor dynamic effects.
Training
Level
Structural mechanicsSimulating Additive Manufacturing Processes in Metal Printing
In this training, you will learn to use Ansys Mechanical to simulate the 3D printing process for components in order to optimize geometry, component orientation & warpage.
Training
Level
Structural mechanicsSimulating Bonded Joints Effectively and Practically
In this course, you will gain practical technology and simulation knowledge for the design of reliable adhesive bonds.
Training
Level
Fluid mechanicsSimulating Heat Transfer Using Ansys Fluent
Learn how to use CFD to simulate the energy transport in components with external and internal flows as well as how to understand temperature-dependent processes.
Training
Level
Structural mechanicsSimulating Roller Bearings Using Rolling Bearing inside Ansys
Learn how you can significantly increase the accuracy of your simulations by considering nonlinear rolling bearing characteristics.
Training
Level
Structural mechanicsSimulating the Plastic Material Behavior of Metals
Learn more about the realistic modeling of material behavior in metals and typical components of plastic strength analyses.
Training
Level
Simulation and managementSimulation and Trade Compliance
Protect yourself and your company by knowing basic trade compliance requirements for simulation activities in an international environment.
Training
Level
Structural mechanicsSimulation of Bolt Connections in Accordance with VDI 2230
Learn how to correctly perform a systematic strength verification in accordance with VDI Guideline 2230 directly within your simulation environment.
Training
eLearning
Level
Why Training with CADFEM?
As a training provider for practice-oriented CAE, CADFEM has a suitable training offer for every simulation topic. In over 50 courses on structural mechanics, fluid mechanics, electromagnetics, and many other simulation trends, we impart know-how for every level. Our focus is on you and your learning success.
Qualiopi certified
CADFEM France SAS is recognized as a certified training organization in France. Ask your OPCO for financing your training.
Learning Paths
Recommendations on how you can reach your learning goal with our trainings according to your level of knowledge and specialist area.
CADFEM Learning Center
All CADFEM training materials are available in a modern, user-friendly learning environment.
120 speakers
CADFEM and external technical experts from industry & research convey demanding content in a technically and didactically sound manner.
On the pulse of time
New markets, innovative industry solutions or high-end software for specialists: constantly new training content.
Hybrid training
Come to our offices or participate remotely. With this format, the experience is the same for face-to-face and remote trainees.
Formation Hybride
CADFEM offers training in a hybrid format: once the training has been scheduled, whether it's tailor-made or standard, come to our offices or participate remotely, or even a bit of both. Thanks to the hybrid training room, whether you want to come in for one day, participate by telecommuting the next day, or even participate throughout the course, it's possible. Training needs are evolving, which is why we've made a point of equipping ourselves accordingly, to better respond to new work rhythms. With this format, the experience is the same for the face-to-face and remote trainee, and the group moves forward together to achieve the same goal.
CADFEM Learning Paths
CADFEM learning pathways give simulation newcomers and experienced FEM and CFD users appropriate training concepts for achieving their individual learning goals. For HR managers, they are a valuable planning aid for systematically building precision simulation concepts within the company.
These customers trust in our training services
Miriam Horak
Mechanical engineer - Project Management Special Applications, STIWA Holding GmbHThe documents and examples in this training are very clear and provide a good basis for getting started with the everyday use of scripting in Ansys Mechanical. The technical competence of the instructor, as well as the friendly manner in which he deals with the participants, is very impressive. Everyone will find what they are looking for here, regardless of experience level. Many thanks for this great and instructive training!
Frederic Hackl
R&D – Development Engineer, Bleckmann GmbH & Co. KGThe CADFEM training provides comprehensive information on verification and numerous comparisons to everyday examples. Many thanks to the great lecturer for sharing the knowledge in such an exciting and exhilarating way.
Dr.-Ing. Martin Perterer
Head of Simulation, KTM F&E GmbHWith the eLearning platform, CADFEM provides a modern and up-to-date offer in the context of knowledge management. This means that employees can be deployed quickly and efficiently for new simulation tasks.
Alexander Kristof
Simulation Engineer - Hybrid Technologies, Erwin Quarder Systemtechnik GmbHThe 110% Ansys Workbench eLearning is very impressive! The workshops are exceptionally good, as you not only repeat what you have learned on familiar models, but also have to apply this knowledge to new ones. The convergence module in particular was very challenging, and I got a lot out of the solution.
Romain Filippi
Director, EC2 ModélisationThe training provided by CADFEM has allowed the entire team to become familiar with Mechanical. It also allows us to imagine new uses for Ansys, increasing the number of projects we plan to use it for.
Shahriar Kahnamooi
Structural Analysis & Simulation, Product Engineering, Springer GmbHThe CADFEM eLearnings are my absolute favorite. On the one hand, they are excellently structured and also vivid, with high-quality content, concise and instructive. On the other hand, I have absolute freedom over the place, time, pace and duration of the training.
Mathilde Chazel
Research and Innovation Engineer, ApitecCADFEM training courses are very complete and well structured. The transition from theory to practice allows us to understand the basics of the software and then to implement them on concrete cases. Thanks to the trainers who are pedagogical and adapt their speech to the most relevant use cases for us.
Maximilian Kraatz
System Developer, EOS GmbHThis makes learning fun! The entire competence of simulation experts concentrated into a high-quality eLearning production.
Stefan Macho
Head of R&D Simulation, HAWE Hydraulik SEThe course is didactically well structured. By alternating between presentation and workshop, attention is always maintained. The lively discussions and questions during the seminar were also very instructive for me. Therefore I am very enthusiastic about the CADFEM offering!
Vanessa Keller
Mechanical engineer, Pfisterer Holding AGGreat course! Once again, very good materials, many workshops with reference to real-world applications, and a friendly, open and communicative instructor who encouraged active participation in the course without being demanding. Very pleasant.
Patrick Doria
Advanced Sensor Engineer, Endress+Hauser SE+Co. KGThe CADFEM training on Ansys Optislang was well structured and the lecturer conveyed the material in a very pleasant, relaxed and calm manner. Questions were also answered thoroughly and professionally. Keep it up!
Lukas Brünjes
Materials Engineering & Simulation, Ottobock SE & Co. KGaAThis self-paced course can be recommended without reservation! With his personal enthusiasm, the trainer succeeded in conveying the complex topics in a lively and pleasant atmosphere. The excellently conveyed content was spiced up by vivid comparisons and practical examples.
Patrick Senger
Senior Engineer, Crash & Multiphysics, KTM F&E GmbHThe varied and exciting contents reminded me of a good television series, where I want to watch the next episode as soon as possible.
Contact
I am at your disposal for any questions or individual offers. I look forward to your message or a conversation with you!
I am also happy to recommend the detailed training FAQ site for any uprising questions.
