Simulation of Electromagnetic Fields with Ansys Maxwell
Simply attracting - magnets, coils, and their effect
From magnetostatics to magnetodynamics: Learn, how to easily model and simulate magnets, coils, etc. This training is offered as a 3-day course or alternatively as a self-paced eLearning course.
Duration
3 days
Prerequisites
None
Software used
Ansys Maxwell
- Learning workflows for tasks ranging from magnetostatics to magnetodynamics
- Linear and non-linear modeling of ferromagnetic materials
- Simulation of eddy currents and losses, forces and torques
- Maxwell Fields Calculator — a tool for user-defined results
Description
Whether the task is linear drives for automation technology, actuators and clutches for automotive applications, inductive charging for electric vehicles, guides and gates for sorting systems, or permanent magnet brakes and sensors for pitch regulation of the rotor blades of a wind turbine, the development of all of these actuators and measurement applications can only be reliably carried out with simulation. In this course, you will learn about the possibilities of simulating electromagnetic components with Ansys Maxwell.
Electromagnetic alternating effects (e.g. damping and eddy currents) or non-linearity (e.g. saturation) complicate the understanding of systems on an analytical basis. Using examples such as a magnet valve, you will learn all the necessary procedures for a quick and accurate solution of electromagnetic tasks, providing you with knowledge that can subsequently be applied to your own models.
This training is ideal for project and development engineers in electromagnetics, research staff, and students interested in efficiently acquiring relevant & practical knowledge of using Ansys Maxwell.
Get a first impression and test the first eLearning module of this training course without any obligation. No costs, no notice period.
Detailed agenda for this 3-day training
Day 1
01 “Necessary” theory and overview
- Application areas for Ansys Maxwell
- Motivation: Permanent magnet brake
- The solver in Maxwell
- Where can I get support when it goes wrong?
02 Modeling and meshing
- Model construction directly in Maxwell
- Geometry orientation and coordinate systems
- Boolean operations
- The rules of geometry modeling
- The meshing process in Maxwell
- Workshop: Static force effect with linear conditions
03 Magnetic materials in Maxwell
- Modeling ferromagnetic materials: linear and non-linear
- BH curves: How to insert them into the material manager
- Permanent magnets (PM): Linear and non-linear, orientation
- Demo Magnet Skew: Helical magnetization
- Inclusion of temperature dependency
- Workshop: Static force effect considering temperature dependency and non-linearities
04 Simulating static magnetic fields in Maxwell
- Modeling electrical sources
- Boundary conditions: Purpose and definition
- Magnetic field energy as the basis for calculating force and torque
- Displaying field variables: Scalar and vector plots in plane and 3D space
- Workshop: Permanent Magnet Brake (static)
Day 2
05 Eddy Current Analysis
- Applications: Inductors, transformers, contactless battery charging
- Adaptive meshing for skin and proximity effects
- Insulation Boundary (M3D)
- “Desired eddy current” workshop: Contactless current transfer
- “Parasitic eddy current workshop”: High losses
06 Transient electromagnetic analyses
- Sine/cosine definitions for sources
- Datasets for time-, distance-, or speed-dependent signals of any form
- Linking the mesh link from static simulations
- Solver settings
- Workshop: Transient Switching Operations
07 Including Mechanical Movements
- Forms of motion and their definition
- Geometric setup: Moving parts – Object groups
- Mesh rules for translation and rotation
- Demo: Linear motor
- Workshop: Linear and Rotating Movements (Constant Speed)
08 Evaluation tools
- Solution information following a simulation
- Convergence check: How good is the solution?’
- Fields Calculator: For user-defined results
- Animating parametric and time field patterns
- 3D plots
- Simulation Reports
- Workshop: Hall Effect Sensors
Day 3
09 Solving technical problems
- Mechanical transient effects
- Application of the learned content
- Derivation of additional result variables
- Workshop: Design of an eddy current brake
10 Electric circuits and magnetic losses
- Circuit editor connecting the windings
- Circuit editor component library
- Parametrization in the circuit editor
- Computing iron losses (eddy current and transient solver)
- Applying the Steinmetz model
- Workshop: IPM Synchronous Motor
11 Maxwell couplings
- Ansys-Maxwell coupling to AEDT Mechanical: thermal, mechanical
- Demo: Link to IcePak
- Workshop: Steady state induction heating
- Summary and outlook for additional couplings
12 Consolidate knowledge and ensure transfer
Now you have a better understanding of your own tasks and know how to tackle them with Maxwell. We summarize the most important points again and give you the opportunity to reflect on important questions in order to consolidate your new knowledge.
Your Trainers
Dr.-Ing. Jörg Neumeyer
Joël Grognuz
Philipp Siehr
Dr. techn. Rene Fuger
Placement in the CADFEM Learning Pathway
Participant data
Additional information
Commentary
Get a first impression and test the first eLearning module of this training course without any obligation. No costs, no notice period.
Whether eLearning, classroom courses, live online training or customized workshops - together we identify the best option for you.
Do you have questions on the training or the eLearning?
If you book through your university, you will receive a 50% discount on the stated fee on training courses and eLearning courses.
For more information on the validity and how booking with the code ACADEMIC50 works, please visit our page on training for academic users.
Straight after you sign up, an automatic confirmation of receipt will be sent to the email addresses you provided. Once you have successfully verified the data you provided, you will receive your personalized sign-up confirmation, containing further information on course fees, the billing address, etc., by email within two to three working days.
As soon as the minimum number of attendees has been reached, you will receive a final training confirmation containing further information. If you have booked an on-site training, we recommend that you wait until you have received this final confirmation before booking your travel and accommodation.
If the minimum number of attendees is not reached, we reserve the right to cancel the training seven days before it is due to start at the latest. We are happy to inform you on changing your booking to an alternative date. Please note that we accept no liability for hotel or travel bookings that attendees have already made.
Usually the training courses start at 9:00 am and end at 5:00 pm of the respective local time. The actual course times will be stated in the booking confirmation. Please note that, depending on the training host, there may be a possible time shift between your and the provider's local time. Therefore all local times are provided with the valid time shift to Greenwich Mean Time (GMT).
To get a clear impression of our online learning format, we offer you a trial allowing you access to the starting module of an eLearning course of your choice. No costs, no cancellation period or anything similar. Moreover, with this free test access you can check all the technical requirements for a smooth learning process. You can easily request the free module from any eLearning course.
Each online course day comprises four eLearning modules. You should ideally allow 90 to 120 minutes of uninterrupted learning time for each module. This will allow you to acquire the knowledge provided by a module and to consolidate it through quiz questions and Ansys exercises. By dividing each module into micro learning units, you can also make good use of smaller time windows, such as on your commute.
Prerequisite for the use of the eLearning courses is the use of a personalized access to the CADFEM learning platform. When purchasing an eLearning course, access to the learning platform is 365 days. As a subscription user, access to the learning platform starts and ends with the start and end of the flat rate. With the start of a further learning product (Learning Subscription, training, eLearning), access to your content is extended by 365 days.