Multibody Dynamics with Ansys Motion
Faster, further, quieter – learn how to efficiently simulate complex motion sequences.
When it comes to developing or improving complex systems, e.g., crankshafts, transmissions, or even entire power trains, questions relating to how well the system functions, the resulting loads, and derived properties such as smoothness or durability are often of great interest. ...
Our offer in detail
This training is offered as a 2-day, consisting of 8 modules.
01 Multi-body Simulation with Ansys Motion
- Overview of types of dynamic analysis
- Areas of application for Ansys Motion
- Typical input and result variables
- Underlying concept of mathematical formulation
- Helicopter rotor head demonstrator: simulation of complex dynamic systems
02 Model Set-up and Simulation
- Overview of simple joint definitions
- Simple spring and damper elements
- Assembly of components for simulation
- Boundary conditions and loads
- Target analysis settings
- Exercise: building a transmission mechanism and checking transmission behavior
03 From Simulation to Result
- Managing result files
- Visualization using animations and contour plots
- Creating and editing diagrams (FFT, integration, ...)
- Best practice tips and presentation of results
- Exercise: determining the opening and holding forces of an engine hood
04 Extended Model Structure
- Measured-variable-dependent loads
- Definition and meaning of coupling equations
- Stops and engagement functions in joints
- Bearings (machine elements)
- Workshop: determining the drive power of an axial pump
05 Non-linear Contacts
- Application field: joints vs. contacts
- Implementation of contacts in Ansys Motion
- Best practice in dealing with contacts
- Exercise: dynamic systems behavior of a cycloidal gearbox
06 Linear Flexible Bodies
- CMS (Component Mode Synthesis) as a reduction method
- Applications and limitations of the method
- Implementation in Workbench
- Vibration behavior of elastic components
- Exercise: improving the positioning accuracy of a pick-and-place machine
07 Nonlinear Flexible Bodies
- Application scenarios
- Numerical method
- Allowing for nonlinear rubber elements
- Contour disc exercise: opening behavior of a valve train
08 Interfaces to the Ansys Product Family
- Project-page-based parameter studies
- Importing force from Ansys Maxwell
- Co-simulation with Ansys Twin Builder
- Co-simulation exercise: designing a controller for a self-balancing scooter
When it comes to developing or improving complex systems, e.g., crankshafts, transmissions, or even entire power trains, questions relating to how well the system functions, the resulting loads, and derived properties such as smoothness or durability are often of great interest. Transient processes like these are typically examined via multibody simulation (MBS, also multi-body dynamics, MBD). Ansys Motion provides the user with a high-end solution. This course has been specifically shaped to provide the kind of introduction to the program that will enable you to use the software in an efficient manner. Through the use of many practical examples, you will become familiar with the interface so you will soon be able to configure the right settings yourself.
Ansys Motion comes with its own preprocessor and postprocessor. The newly developed Workbench interface now provides the user with a powerful postprocessor in addition to the solver. During the course, the entire model setup and simulation will be performed in Workbench. Post-processing is carried out in Motion's own post-processor.
This course is aimed at simulation engineers involved in the development of complex, moving structures. It does not matter whether you already have experience in the field of multibody simulation or in simulation with Ansys or if you are a complete beginner. This course offers the perfect introduction to Ansys Motion and shows you the best ways to use it.
You will be enabled to build, solve and correctly interpret MBS models for the simulation of complex motion sequences. You will thereby leave behind the basic assumption that all bodies are rigid and learn how to consider flexible and therefore oscillating bodies. This will enable you to calculate bearing loads and requisite drive torques in the shortest possible time and also to uncover design deficits and kinematic constraints.
Placement in the CADFEM Learning Pathway
Do you have questions on the training?
If you book through your university, you will receive a 50% discount on the stated fee on training courses and eLearning courses.
For more information on the validity and how booking with the code ACADEMIC50 works, please visit our page on training for academic users.
Straight after you sign up, an automatic confirmation of receipt will be sent to the email addresses you provided. Once you have successfully verified the data you provided, you will receive your personalized sign-up confirmation, containing further information on course fees, the billing address, etc., by email within two to three working days.
As soon as the minimum number of attendees has been reached, you will receive a final training confirmation containing further information on how to get to the venue. We recommend that you wait until you have received this final confirmation before booking your travel and accommodation.
If the minimum number of attendees is not reached, we reserve the right to cancel the training seven days before it is due to start at the latest. We are happy to inform you on changing your booking to an alternative date. Please note that we accept no liability for hotel or travel bookings that attendees have already made.
Usually the training courses start at 9:00 am and end at 5:00 pm of the respective local time. The actual course times will be stated in the booking confirmation. Please note that, depending on the training host, there may be a possible time shift between your and the provider's local time. Therefore all local times are provided with the valid time shift to Greenwich Mean Time (GMT).